Flat Scanstrip

Adhesive flat scanstrip for the FRONT of retail or warehouse shelves.

Flat Scanstrip is the industry standard for most retail applications. (For hanging, angled or special profiles see other menu categories).

For optimal results adhesive Scanstrip should only be applied to properly prepared shelving. Shelf surface should be flat with any previous adhesive, dust or greasiness removed. Wipe with undiluted methylated spirits or white spirits. Allow to dry for at least 15 minutes before applying new Scanstrip.

To apply new Scanstrip, peel back adhesive backing paper from one end and gradually apply pressure and remove backing as you work along the shelf. Use a bunched up soft cloth to apply pressure to the front of the scanstrip as you work along the length. Butt the next piece to the first one and continue in the same manner. To allow the adhesive to cure properly, leave overnight or for a few hours before inserting tickets or other accessoreis. A little patience at this point will mean the Scanstrip stays firmly attached and stable for much longer.

If longevity, or a glossy look, is what you are after, select the Provista Scanstrip. With Scanstrip, "You get what you pay for."  Low cost scanstrip is made from PVC which will deteriorate, discolour and go brittle over time. Provista is made from better quality materials, is glossy and will last much longer.

Scanstrip can be cut to size if required.

Scanstrip can be made in custom sizes or colours (minimum production quantities of 1000 metres apply for most profiles).